Need help?Do you have a question about the HiLook DVR-108G-M1 and is the answer not in the manual?
General information about the manual's content and usage.
Lists trademarks, logos, and provides legal disclaimers regarding product use and liability.
Details FCC compliance, conditions, and potential interference issues for the device.
States compliance with European standards and directives for CE marking.
Lists the product series and their corresponding model numbers for reference.
Defines the meaning of symbols used in the document (Danger, Caution, Note) for clarity.
Essential safety instructions for operating the device, covering power, grounding, and handling.
Tips for proper installation, ventilation, environmental handling, and device operation.
Step-by-step guides for installing Hard Disk Drives (HDDs) into the device.
Instructions for installing HDDs using internal brackets and front panel access.
Guide for installing HDDs directly onto the device's bottom, including cable connections.
Step-by-step guide to replace the internal coin/button cell battery.
Initial activation process, setting admin password, and security recommendations.
Instructions for setting up unlock patterns and logging in via password.
Explanation of the Live View interface, icons, and shortcut menus.
Steps to configure parameters for controlling PTZ cameras effectively.
Guide to customizing PTZ camera presets, patrol paths, and movement patterns.
Overview of the playback interface and steps for normal video playback.
Procedures for playing back event videos and clipping/exporting video segments.
General search procedures and detailed guide for searching by face picture.
Steps for quickly exporting search results to a backup device.
Initial setup for system parameters, general network settings, and DHCP/DNS.
Managing user accounts, permissions, and password recovery methods.
Detailed configuration of network parameters including IP, subnet, and gateway.
Configuring email alerts and enabling HiLookVision for remote access.
Configuring camera signal types and binding devices with HiLookVision.
Procedures for adding network cameras using device password or manual configuration.
Configuring motion detection parameters and On-Screen Display (OSD) for cameras.
Setting up various alarm linkage actions like pop-ups, buzzers, and email notifications.
Configuring arming schedules and overview of recording management settings.
Steps for initializing HDDs and adding network disks (NAS/IP SAN) for storage.
Setting up continuous and event-triggered recording schedules for cameras.
Configuring recording parameters like stream type, frame rate, resolution, and bitrate.
General system settings including language, resolution, and DST in expert mode.
Configuring Live View general parameters and additional system settings like device name.
Introduction to network settings and detailed TCP/IP configuration steps.
Configuring Dynamic DNS (DDNS) and PPPoE for internet connectivity.
Setting up NAT for remote access using Auto or Manual port mapping.
Configuring Wi-Fi connection and setting up Network Time Protocol (NTP) for time sync.
Configuring log server uploads and various port settings for device functionality.
Detailed explanation of ports (Server, HTTP, RTSP) and output bandwidth limits.
Configuring camera signal input types and managing camera settings.
Procedures for adding network cameras via auto-search and manual configuration.
Using Plug-and-Play, editing parameters, and upgrading firmware for network cameras.
Managing camera configuration files through import and export functions.
Configuring camera display settings (OSD, image) and privacy masks.
Configuring normal event detection, specifically motion detection.
Setting up video tampering and video loss detection with linkage actions.
Configuring external alarm inputs and alarm outputs with linkage actions.
Configuring line crossing detection rules, areas, and parameters.
Configuring intrusion detection and region entrance detection features.
Configuring face capture, managing face picture libraries, and uploading pictures.
Setting up face picture comparison and configuring arming schedules for events.
Detailed configuration of various alarm linkage actions, including pop-ups and PTZ control.
Setting up continuous and event recording schedules and configuring recording parameters.
Initializing HDDs and adding network disks for video storage.
Configuring HDD groups and allocating storage quotas for cameras.
Configuring advanced recording settings like overwrite, HDD sleeping, and saving VCA data.
Restoring device settings to factory defaults and searching system logs.
Configuring system services, RTSP authentication, and HTTP security.
Performing scheduled reboots, managing device status, and upgrading firmware.
Procedures for upgrading device firmware locally or via the internet.
Configuring event hints and viewing alarm details in the alarm center.
Instructions for accessing the device via a web browser and logging in.
Performing live view, playback, and configuration tasks through the web interface.
Definitions of technical terms used throughout the manual.
To Next Page
General