Need help?Do you have a question about the HiLook HiWatch Series and is the answer not in the manual?
General| Operating System | Embedded Linux |
|---|---|
| Operating Humidity | 10% to 90% |
| Video Input | 4/8/16 channels |
| Video Output | 1 × HDMI, 1 × VGA |
| Network Interface | 1 RJ45 10M/100M adaptive Ethernet interface |
| Compression | H.264+/H.264 |
| Audio Output | 1 channel |
| USB Interface | 2 USB 2.0 ports |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to +55°C |
Provides instructions for using and managing the product, including explanations and general guidance.
Lists trademarks and logos of Hikvision and other respective owners.
Outlines limitations of liability, warranties, and user responsibilities regarding product use.
Details FCC compliance, potential interference, and corrective measures for the device.
States the two conditions under which the device complies with FCC rules.
Confirms product compliance with applicable harmonized European standards and directives.
Explains battery disposal guidelines and marking symbols according to the EU directive.
Confirms the device meets Industry Canada ICES-003 standards for digital devices.
Guides users through the initial activation process by setting an admin password for the device.
Describes methods for logging into the device after activation, including password and pattern options.
Explains how to set and confirm a graphical unlock pattern for device access.
Details the procedure for logging into the device using a pre-defined unlock pattern.
Outlines the steps to log in using the user name and password credentials.
Introduces the graphical user interface for live view, including shortcut menus and icons.
Covers the functionality and controls for Pan, Tilt, and Zoom (PTZ) enabled cameras.
Guides on setting up parameters necessary for controlling PTZ cameras effectively.
Explains how to set predefined camera positions for quick access and event response.
Describes how to create patrol paths by sequencing multiple PTZ presets for automated camera movement.
Details how to record and recall specific PTZ camera movement paths and dwell times.
Introduces the playback interface, timeline, and controls for reviewing recorded video.
Guides on how to play back standard recorded videos, including timeline navigation and controls.
Explains how to playback videos triggered by specific events like motion detection or line crossing.
Describes the process of clipping and exporting video segments to a backup device.
Details how to search for recorded video, picture, or event files based on various criteria.
Provides a streamlined method for exporting recorded files to a backup device.
Covers basic system settings like output resolution, system time, and general parameters.
Focuses on configuring general system settings such as date, time, resolution, and network time synchronization.
Explains how to add, manage, and define user accounts and their permissions.
Details how to configure hints for exception events and set linkage actions.
Guides on setting up network parameters for device connectivity and remote access.
Covers essential network settings like IP address, subnet mask, and gateway.
Describes how to enable and use Hik-Connect for remote access via mobile applications.
Details how to configure email notifications for event alerts.
Covers managing cameras connected to the DVR, including signal input types.
Guides on selecting signal input types (HD/CVBS or IP) for each camera channel.
Explains how to add network cameras to the DVR, both automatically and manually.
Details how to configure On-Screen Display (OSD) settings like date, time, and camera name.
Guides on enabling and configuring motion detection for cameras.
Describes how to set schedules for when motion detection and other events are active.
Explains how to define actions to be taken when an alarm is triggered.
Covers managing how and when the device records video footage.
Guides on initializing HDDs and adding network storage devices.
Details how to set schedules for continuous and event-triggered recording.
Covers configuring recording parameters like stream type, frame rate, and resolution.
Covers advanced system settings beyond basic configuration, including language and display.
Details advanced general system settings like DST, device name, and lock screen timeout.
Configures advanced live view parameters such as output interface and window division.
Refers to user management details, likely for advanced user settings.
Covers advanced network configuration options for connectivity and remote access.
Details advanced TCP/IP settings, including working modes and network fault tolerance.
Explains how to configure Dynamic DNS for remote access using a domain name.
Covers NAT (Network Address Translation) for port mapping to enable remote access.
Guides on connecting the device to a wireless network using a Wi-Fi dongle.
Details configuring a log server for backing up system logs and improving communication security.
Explains how to configure Network Time Protocol (NTP) for accurate system time synchronization.
Covers configuration of various network ports for different functions like alarm and remote access.
Refers to detailed Hik-Connect configuration for remote access.
Refers to detailed email configuration for event notifications.
Covers advanced camera management features.
Guides on selecting signal input types for cameras in expert mode.
Explains how to add network cameras using automatic search or manual configuration.
Configures advanced camera display settings, including OSD, image, and exposure.
Details how to configure privacy mask areas to obscure specific parts of the camera view.
Covers configuring various event types like motion detection and video tampering.
Guides on setting up and configuring normal events such as motion detection.
Details advanced perimeter protection features like line crossing and intrusion detection.
Sets up arming schedules for event detection and alarm linkage.
Configures how the system responds to triggered alarms, including pop-ups and buzzer alarms.
Guides on restoring device settings to factory defaults or specific states.
Explains how to search, view, and export system logs for operations and events.
Covers accessing and configuring system services for device management.
Details procedures for upgrading the device firmware.
Guides on performing firmware upgrades using a local backup device.
Explains how to upgrade the device firmware using the latest online version.
Configures which events trigger notifications or hints in the alarm center.
Describes how to view and manage detected alarms and events within the alarm center interface.
Introduces how to access and operate the device via a web browser.
Details the process of logging into the device's web interface using a browser.
Explains how to view live video feeds through the web interface after logging in.
Guides on accessing and playing back recorded videos via the web interface.
Describes how to access and modify device settings through the web configuration interface.
Explains how to access and search system logs through the web interface.
Provides definitions of technical terms and acronyms used throughout the manual.
Offers a document detailing communication protocols and compatibility information.
Provides a link or reference to a document containing device command codes and syntax.
To Next Page
