Need help?Do you have a question about the HiLook DVR-E00G-B Series and is the answer not in the manual?
General| Video Compression | H.265+/H.265/H.264+/H.264 |
|---|---|
| Audio Compression | G.711U |
| Audio Input | RCA interface (2.0Vp-p, 1kΩ) |
| Audio Output | 1 channel, RCA (Linear, 1kΩ) |
| IP Video Input | Up to 4 channels |
| IP Video Input Resolution | 1080P/720P/4CIF/DCIF/2CIF/CIF/QCIF |
| Network Interface | 1 RJ45 10M/100M adaptive Ethernet interface |
| Hard Disk | 1 SATA interface |
| Capacity | Up to 6TB |
| USB Interface | 2 × USB 2.0 |
| Power Supply | 12 VDC |
| Working Temperature | -10°C ~ +55°C (14°F ~ 131°F) |
| Operating Humidity | 10% to 90% |
| Video Bitrate | 32Kbps~8192Kbps |
| VGA Output | 1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
Information about the manual, subject to change due to updates.
Lists trademarks and logos of Hikvision and other companies.
Legal disclaimer regarding product use, liability, and limitations.
Compliance details for FCC rules regarding digital devices and radio frequency energy.
Statement of compliance with European standards (EMC, LVD, RoHS).
Guide for activating the video recorder by setting an admin password.
Instructions and methods for logging into the device.
How to set a graphical unlock pattern for device login.
Steps to log in using the previously set unlock pattern.
Steps to log in using a username and password.
Overview of the graphical user interface for live view.
How to control Pan, Tilt, and Zoom functions of cameras.
Setting up parameters for PTZ cameras before control.
Setting specific camera positions for quick recall.
Defining a sequence of PTZ presets for automated camera movement.
Recording and playing back camera movement paths.
Overview of the playback interface and controls.
How to play back standard recorded videos.
Playing back videos triggered by specific events like motion detection.
How to select and export video clips to a backup device.
Searching for recorded video, picture, or event files.
Quickly exporting recorded files to a backup device.
Basic system settings like date, time, and resolution.
Configuring general system parameters like date, time, resolution.
Managing user accounts and permissions.
Setting up event hints and linkage actions for exceptions.
Configuring network settings for device access.
Basic network settings like IP address and DNS.
Setting up remote access via the HiLookVision mobile app.
Configuring email notifications for events.
Managing camera settings and connections.
Setting up analog and IP signal inputs for cameras.
Adding and managing IP cameras connected to the recorder.
Configuring On-Screen Display settings for cameras.
Setting up motion detection parameters and areas.
Setting up schedules for when detection features are active.
Defining actions to take when an alarm is triggered.
Initializing and managing storage devices like HDDs.
Setting up schedules for continuous or event-based recording.
Adjusting parameters like frame rate, resolution, and bitrate for recording.
Calculating and viewing the estimated recording duration.
Initializing and managing storage devices.
Configuring storage modes like HDD groups.
Setting storage quotas for individual cameras.
Configuring advanced recording settings like overwrite and HDD sleeping.
Advanced system settings.
Configuring basic system settings in expert mode.
Advanced live view settings.
Managing user accounts in expert mode.
Configuring network parameters.
Configuring TCP/IP network parameters.
Dynamic DNS configuration for remote access.
Network Address Translation for port mapping.
Connecting the device to a wireless network.
Configuring settings for uploading system logs to a server.
Configuring Network Time Protocol for time synchronization.
Configuring various network ports for device functions.
Platform access configuration for HiLookVision.
Configuring email settings.
Managing camera settings and connections.
Setting analog and IP signal inputs for cameras.
Adding and managing network cameras.
Configuring camera display settings like OSD and image.
Configuring privacy mask areas to block sensitive regions.
Configuring event settings and linkage actions.
Configuring normal events like motion detection and video tampering.
Configuring video tampering detection and alarm response.
Configuring video loss detection and alarm response.
Configuring linkage actions for external sensor alarms.
Configuring alarm outputs when an alarm is triggered.
Configuring event hints and linkage actions for exceptions.
Configuring perimeter protection features like line crossing.
Setting up line crossing detection rules and areas.
Configuring intrusion detection for virtual regions.
Configuring region entrance detection for virtual regions.
Configuring region exiting detection for virtual regions.
Setting up schedules for detection features.
Defining actions for alarms like pop-up windows and buzzers.
Setting up audible alarms.
Sending alerts to a surveillance center.
Setting up email notifications for alarms.
Activating alarm outputs for events.
Setting up PTZ actions triggered by alarms or events.
Restoring device settings to factory defaults.
Viewing and exporting system logs.
Configuring system services like RTSP authentication.
Upgrading the device firmware.
Performing a firmware upgrade from a local backup device.
Performing a firmware upgrade via the network.
Configuring events to be displayed in the alarm center.
Accessing and viewing alarm details in the alarm center.
Introduction to accessing the device via a web browser.
Logging into the device using a web browser.
Viewing live video streams through the web interface.
Accessing recorded video playback via the web interface.
Accessing configuration settings via the web interface.
Viewing system logs via the web interface.
Definitions of technical terms used in the manual.
To Next Page
