HiLook DVR-E00G-B Series - HiLookVision

If the DHCP server is available, you can enable DHCP to automacally obtain an IP address
and other network sengs from that server.
Auto Obtain DNS
If DHCP is enabled. You can enable Auto Obtain DNS to automacally obtain Preferred DNS
Server and Alternate DNS Server.
3. Click Apply.
5.2.2 HiLookVision
HiLookVision provides mobile phone
applicaon and plaorm service to access and manage your
connected devices, which enables you to get a convenient remote access to the video security
system.
Steps
1. Go to
Conguraon → Network → HiLookVision .
2. Select Access Type as HiLookVision.
3. Turn on Enable. The service terms will pop up.
1) Scan the QR code to read the service terms and privacy statement.
2) Check I have read and agree to Service Terms and Privacy Statement if you agree with the
service terms and privacy statement.
3) Click OK.
4. Click
to set vericaon code.
5. Oponal: Enable Stream Encrypon. It requires to enter vericaon code in remote access and
live view
aer this funcon is enabled.
6. Oponal: Edit Server IP.
7. Bind your device with a HiLookVision account.
1) Use a smart phone to scan the QR code, and download HiLookVision app. You can also
download it from
hps://appstore.hikvision.com , or the QR code below. Refer to
HiLookVision Mobile Client User Manual for details.
Figure 5-5 Download HiLookVision
2) Use HiLookVision to scan the device QR, and bind the device.
Digital Video Recorder User Manual
19