Need help?Do you have a question about the HiLook DVR-232Q-M2 and is the answer not in the manual?
General| Video Compression | H.265+/H.265/H.264+/H.264 |
|---|---|
| Audio Compression | G.711u |
| Audio Bitrate | 64 Kbps |
| Audio Input | 1-ch, RCA (2.0 Vp-p, 1 KΩ) |
| Audio Output | 1-ch, RCA (Linear, 1 KΩ) |
| Hard Drive | 2 SATA interfaces |
| Power Supply | 12 VDC |
| Operating Humidity | 10% to 90% |
| Dimensions | 380 × 320 × 48 mm (15.0 × 12.6 × 1.9 inch) |
| Weight | ≤ 2.1 kg (4.6 lb) |
| Recording Resolution | 4 MP/3 MP/1080p/720p |
| Encoding Resolution | 8 MP/5 MP/4 MP/3 MP/1080p/720p |
| Video Bitrate | 32Kbps~16Mbps |
| Video Output | 1-ch HDMI, 1-ch VGA |
| VGA Output | 1920 x 1080 |
| Two-Way Audio | 1-ch, RCA (2.0 Vp-p, 1 KΩ) |
| Network Interface | 1, RJ45 10M/100M/1000M self-adaptive Ethernet interface |
| USB Interface | 2 × USB 2.0 |
| Consumption | ≤ 20 W (without HDD) |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Power Consumption | ≤40W (without HDD) |
| Operating Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Video Input | 32 channels |
| IP Video Input | Up to 16-ch |
Guides on setting an admin password for initial access and activation.
Details how to search for recorded video, picture, or event files based on various criteria.
Covers general network settings like IP address, subnet mask, and gateway.
Guides on setting recording schedules and configuring recording parameters.
Covers TCP/IP configuration, including working modes like multi-address and net-fault tolerance.
Covers configuration for various events like motion detection, perimeter protection, and alarms.
Guides on setting recording schedules and configuring recording parameters.
Guides on restoring device settings to factory defaults (simple, factory, or inactive).
Covers firmware upgrade procedures via local storage or online.
Details the process of logging into the device through its web interface.
To Next Page
