HiLook DVR-E00G-B Series - Storage Device

6.5.4 Storage Device
Inialize HDD
If it is the rst me you use your HDD, please inialize it aer it is installed.
Before You Start
Install at least an HDD to your video recorder.
Steps
1. Go to
Conguraon → Record → Storage .
2. Select an HDD.
3. Click Init.
Repair Database
Repair an HDD that with error in database. Please operate it with the help of professional
technical support.
Secure Erase
Secure erase will delete videos in the selected disk(s).
Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1. Go to Conguraon → Record → Storage .
2. Click Add.
3. Set NetHDD.
4. Set Type as NAS or IPSAN.
5. Enter NetHDD IP address.
6. Click
to search the available disks.
Digital Video Recorder User Manual
63