HiLook DVR-E00G-B Series - Advanced Settings

Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to
acvate the new sengs.
6.5.6 Advanced Sengs
Steps
1. Go to Conguraon → Record → Advanced .
2. Congure the parameters as your desire.
Overwrite
●
Disable: When the HDD is full, video recorder will stop
wring.
●
Enable: When hard drive is full, video record will
connue to write new les by deleng the
oldest
les.
Enable HDD Sleeping
HDDs which are free of working for a long me will turn into sleep status.
Save Camera VCA Data
Camera VCA data will be saved so that you can search it.
Alarm Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm informaon.
Picture Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing pictures.
H.264+/265+ for All the Analog Cameras
Enable H.264+/265+ for all the analog cameras.
6.6 RS-232
Sengs
Steps
Note
This funcon is only available for certain models.
1. Go to Conguraon → RS-232 .
2.
Congure RS-232 parameters, including baud rate, data bit, stop bit, parity, ow control and
usage.
Console
Digital Video Recorder User Manual
66