HiLook DVR-E00G-B Series - Configure HDD Quota

Figure 6-26 Group
5. Click Apply.
6. Restart the video recorder to acvate the new storage mode sengs.
7. Aer restart, go to Conguraon → Record → Storage .
8. Click of desired HDD to set the group.
9. Select a group number for the current HDD.
10. Click OK.
Note
Regroup the cameras for HDD if the HDD group number is changed.
Congure HDD Quota
Each camera can be congured with an allocated quota for storing videos.
Steps
Note
This funcon is only available for certain models.
1. Go to Conguraon → Record → Storage Mode .
2. Set Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in Record Capacity.
Figure 6-27 Quota
Digital Video Recorder User Manual
65