HiLook DVR-E00G-B Series - Video Tampering

-
Click Draw Area or Clear to draw or clear areas. The rst area is set as full screen by default.
-
Click Full Screen to set the moon detecon area as full screen. You can drag on the preview
window to draw moon detecon areas.
5. Adjust
Sensivity. Sensivity allows you to calibrate how readily movement triggers the alarm. A
higher value results in the more readily to triggers
moon detecon.
6. Set analysis mode as AI or PIR.
AI
The moon detecon event will be analyzed by your device.
PIR
The
moon detecon event will be analyzed by certain analog PIR cameras.
7. Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
8. Set the arming schedule. Refer to
Congure Arming Schedule for details.
9. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
10. Click Apply.
Video Tampering
Trigger alarm when the lens is covered and take alarm response acons.
Steps
1. Go to Conguraon → Event → Normal Event → Video Tampering .
Figure 6-15 Video Tampering
2. Set Camera.
3. Turn on Enable.
Digital Video Recorder User Manual
50