HiLook DVR-E00G-B Series - Line Crossing Detection

Line Crossing Detecon
Line crossing detecon detects people, vehicles, and objects crossing a set virtual line. The
detecon direcon can be set as bidireconal, from le to right or from right to le.
Steps
1. Go to Conguraon → Event → Perimeter Protecon → Line Crossing .
2. Set Camera.
3. Turn on Enable.
4. Set the
detecon rules and detecon areas.
1) Set Arming Area.
2) Set
Direcon as A<->B, A->B, or A<-B.
A<->B
Only the arrow on the B side shows. An object crossing a congured line in both direcons
can be detected and trigger alarms.
A->B
Only an object crossing the congured line from the A side to the B side can be detected.
B->A
Only an object crossing the
congured line from the B side to the A side can be detected.
3) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the detecon region.
5. Adjust
Sensivity. Sensivity allows you to calibrate how readily movement triggers the alarm. A
higher value results in the more readily to triggers moon detecon.
6. Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
Note
This funcon is only available for certain models.
7. Set the arming schedule. Refer to Congure Arming Schedule for details.
8. Set the linkage
acons. Refer to Congure Alarm Linkage Acon for details.
9. Click Apply.
Intrusion
Detecon
Intrusion detecon funcon detects people, vehicles, or objects that enter and loiter in a pre-
dened virtual region.
Steps
1. Go to Conguraon → Event → Perimeter Protecon → Intrusion .
2. Select Camera to
congure.
3. Turn on Enable.
4. Set the
detecon rules and detecon areas.
Digital Video Recorder User Manual
54