1
DX 460 powder-actuated tool
Warning signs
General
warning
Warning:
hot surface
Description of main parts
@ Exhaust gas piston return unit
; Guide sleeve
= Housing
% Cartridge guideway
& Power regulation wheel release button
( Power regulation wheel
) Trigger
+ Grip
§ Piston return unit release button
/ Ventilation slots
: Piston rings
· Piston *
$ Fastener guide *
£ Fastener guide release button
| Buffer *
¡ Magazine *
Q Magazine cover
W Magazine cover release button
E Magazine release button
R Load status indicator
T Replaceable fastener guide nosepiece *
* These parts may be replaced by the user/operator.
Obligation signs
Wear eye
protection
Wear a
safety helmet
Wear ear
protection
Symbols
Read the opera-
tion instructions
before use
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating instruc-
tions are with the tool when it is
given to other persons.
Contents Page
1. General information 1
2. Description 2
3. Accessories 3
4. Technical data 5
5. Safety precautions 5
6. Before use 6
7. Operation 7
8. Care and maintenance 9
9. Troubleshooting 11
10. Disposal 16
11. Warranty 17
1. General information
1. 1 Signal words and their meaning
WARNING
The word WARNING is used to draw attention to a poten-
tially dangerous situation which could lead to severe
personal injury or death.
CAUTION
The word CAUTION is used to draw attention to a poten-
tially dangerous situation which could lead to minor per-
sonal injury or damage to the equipment or other prop-
erty.
1. 2 Pictograms
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the designation “ the
tool” always refers to the DX 460 powder-actuated tool.
Location of identification data on the tool
The type designation and the serial number are printed
on the type plate on the tool. Make a note of this infor-
mation in your operating instructions and always refer
to it when making an enquiry to your Hilti representa-
tive or service department.
Type: DX 460
Serial no.:
To Next Page
Loading...
Need help?
General
