4
Accessories
Ordering designation Application
X-SGF8 Splinter guard for the X-460-F8 standard fastener guide
X-460-SGMX Splinter guard for the X-460-MX72
X-460-STAB For the X-460-F10 fastener guide
X-460-TIE Replacement nosepiece for the X-460-FIE fastener guide
X-460-TIE-L Replacement nosepiece for the X-460-FIE-L fastener guide
X-EF adaptor X-EF adaptor for stabilizing the tool perpendicular to the work surface and for reduc-
ing concrete spalling when fastening the X-EKB and X-ECH (only with X-460-F8 fas-
tener guide)
X-460-B Rubber buffer – protects the fastener guide when the tool is used incorrectly
X-460-WH23/36 Washer holder – For fastening 23 and 36 mm steel washers with the magazine. The
washer holder can be mounted on the magazine.
X-PT 460 Pole tool extension – Extension system for various ceiling application
Pistons
Ordering designation Application
X-460-P8 Standard piston
X-460-P8AL AL piston – Only for AL nails. Gives the nail better guidance and increases the applica-
tion limit.
X-460-P8W Wood piston – With a tapered point. For applications when overdriving the nail into
wood is desired. Allows proper piston return.
X-460-P10 10 mm piston – For fastening M 10 / W10 studs
X-460-PIE Piston for driving X-IE insulation fasteners using the X-460-FIE fastener guide
X-460-PIE-L Piston for driving X-IE insulation fasteners using the X-460-FIE-L fastener guide
Cartridges
Ordering designation Colour code Power level
6.8/11 M green Green Low
6.8/11 M yellow Yellow Medium
6.8/11 M red Red Heavy
6.8/11 M black Black/purple Extra heavy
Safety accessory and cleaning set
Safety goggles, earplugs, Hilti spray, ramrod, flat brush, large round brush, small round brush, scraper, cleaning
cloth.
To Next Page
Loading...
Need help?
General
