To Next PageTo Next PageWhy won't my Hilti Security Sensors turn on?
Your Hilti Security Sensors might not be turning on because the battery is exhausted (replace the battery), inserted incorrectly (insert the battery correctly), or the battery compartment isn't closed properly (close the battery compartment).
What to do if Hilti Security Sensors display an electromagnetic interference warning?
If your Hilti Security Sensors are showing an electromagnetic interference warning, it means the tool is too close to a source of electromagnetic interference. The solution is to keep the tool away from such sources.
What to do if Hilti Security Sensors display a temperature warning?
If your Hilti Security Sensors display a temperature warning, it means the temperature is either too high or too low. Make sure to observe the operating temperature range specified in the technical data.
How to fix Hilti PS 30 that can’t calibrate itself?
If your Hilti Security Sensors can’t calibrate, it might be too close to metal objects. To fix this, switch the tool off, move it at least 30 cm (12 in) away from any metal objects and the work surface, and then switch it on again.
General| Brand | Hilti |
|---|---|
| Model | PS 30 |
| Category | Security Sensors |
| Language | English |
Explains the meaning of DANGER, WARNING, CAUTION, and NOTE safety level indicators.
Explains warning signs and other symbols used in the manual for better understanding.
Details the intended applications and limitations of the Hilti PS 30 ferrodetector.
Describes the different areas of the tool's display and their functions.
Explains the meaning and status of the various indicator lights on the tool.
Explains the meaning of symbols that appear in the tool's display, like audible signal status.
Details error messages and warning symbols shown by the tool, aiding in troubleshooting.
Shows how to interpret the battery charge status based on the number of segments displayed.
Lists all accessories provided with the PS 30 ferrodetector.
Lists detailed technical specifications including detection range, accuracy, power, and dimensions.
Covers fundamental safety precautions and important warnings for using the tool.
Provides guidance on safe working practices, posture, and environmental considerations.
Discusses potential interference and compliance with EMC standards.
Offers essential safety advice for tool usage, care, and maintenance.
Outlines specific safety precautions related to the tool's batteries.
Provides guidelines for safely transporting the tool and its components.
Step-by-step instructions for correctly inserting the batteries into the tool.
Procedures for verifying the tool's condition and readiness before operation.
Instructions on how to power the ferrodetector on and off using the designated button.
Explains how to enable or disable the audible signal feature of the tool.
Details steps for self-test and calibration before commencing measurements.
Offers guidance on proper technique and usage for accurate detection.
Describes the recommended sweeping motion for effective scanning.
Explains the process of identifying and marking ferrous and non-ferrous metal objects.
Instructions for cleaning and drying the tool to maintain its condition.
Provides instructions for properly storing the tool and its accessories.
Guidelines for safe transportation of the tool.
Information about recommended calibration services for ensuring tool accuracy.
Lists common faults with the tool and provides solutions for each.
Contains statements regarding FCC and IC compliance for US and Canadian markets.
Guidance on environmentally responsible disposal of the tool and batteries.
Details the terms, conditions, and exclusions of the manufacturer's warranty.
Declares the product's compliance with relevant European directives and standards.
