Hold both the “ + ” and “ - ” keys together for two seconds.
Display will show a flashing “ tC-n ” (no), press “ + ” key to change it to “ tC-y ” (yes).
Confirm by holding “ ” for two seconds. Display will then show odometer (total miles).
Press “ ” to switch to trip meter, which will now read zero.
◆ Reset Trip Meter
NOTICE: If the motor power ever becomes too strong for riders’ preference or sense of safety, simply apply the handbrake to cut off motor power
completely. If the throttle assist seems accidentally engaged too easily, causing unwanted acceleration, simply apply the handbrake or lower the
Pedal Assist level to 0 to disengage the throttle.
22
To Next Page
Loading...
