Himiway ESCAPE - Pedal - Assist Adjustment

To adjust, hold both “ + ” and “ - ” together for two seconds, bringing you to the trip meter reset screen described above.
Then, hold both “ + ” and “ - ” together again for two seconds, bringing you to the Passcode screen (“ P ”). Here you can enter a 4-digit passcode, which is
0510.
To receive mild power assist when walking the bike long distances, or up minor hills, press and hold “-” key to slowly power the bike forward at walking speed.
Press “ + ” and “ - ” to adjust numbers up/down.
Press “ ” to confirm.
◆
Pedal - Assist Adjustment
◆ Walk Mode:
The e-bike ships with standard Pedal Assist settings ranging from 0 (no assist) to 5 (maximum assist).
To change the level range of power assist, press “ + ” key to arrive at Pedal Assist adjustment screen (“SC”), then press “ ” to enter.
You may now select preferred range with the “ + ” and “ - ” keys: 0-5, 1-5, 0-7, 1-7, 0-9, 1-9
To optionally change the percentage of power assist for each level of range, press “ ” once again. The percentage will flash next to the level.
Press “ + ” and “ - ” to adjust percentage up/down.
Press “ ” to confirm.
•
•
•
•
23