◆ Start-up Procedure
Press and hold the power button “ ” on the control panel for two seconds until the display comes on.
Press the information button “ ” on the control panel to cycle through the display settings: odometer, trip meter, max speed, and average speed.
Press the light button “ ” to turn both the headlight and taillight on/off. When powered on, the light icon will display on-screen.
Press “ + ” or “ - ” to increase the Pedal Assist level up or down respectively. [See page 38 to learn about 3 different modes]
Monitor the power consumption meter, higher levels mean faster battery drain.
1.
2.
3.
4.
5.
MILE MILE
MILEMILEMILE
25
To Next Page
Loading...
