NOTICE: This order helps extend the battery life and effectively reduces battery damage caused by improper charging.
Battery Charging
Charging Procedure for On-bike Charging
Remove the rubber cover on the charging socket and insert the DC plug (Plug 2) of the charger into the battery charging socket (fig. 2).
Connect the power plug (110/220 volt plug) to the power socket.
Plug 2
Plug 1
Plug 2
Plug 3
Check the battery power indicator on your display (the power level indicator on the display is not the actual power but the voltage power).
Assemble the charger as shown in Figure 1 by inserting the plug (Plug 1) into the transformer.
Step 1:
Step 2:
Step 3:
Step 4:
Figure 1 Figure 2
31
To Next Page
Loading...
