EasyManua.ls Logo

HIMO C20 - Solutions of trouble; Troubleshooting common problems

HIMO C20
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solutions of trouble
Bike is not powered
1.The bike is in the brake status 2.In the parking status
3.The speed did not reach 5km/h 4. Startup switch fault
1.Check whether the battery plug is properly inserted
2. Battery undervoltage, charge the battery
1.Whether the brake lever is on the brake 2.Remove P mode
3.Manpower riding to 5km/h 4.Please contact after-sales service
Problems Reasons for the problem Solution way
When the power is turned on ,
the bike can not be powered on
Turn on the power and turn on
the handlebar,motor does not start
Insufficient mileage
Battery fails to charge
Instrument no display
1.Battery undercharge 2.Tire pressure deficiency
3.Frequent brake start 4.Battery aging or normal
5.Low ambient temperature,Battery capacity attenuation
1.No power supply for bike 2.Power converter damaged
3.Instrument faults
1.Check if the plug is loose
2.Wait for the battery to return to charging temperature
3.Wait for the battery to return to charging temperature
1.Check if the charger damage or not
2.Check tire pressure before using
3.Develop good driving habits 4.Replace the battery
5.Belong to normal phenomenon
1.Check that the battery is plugged properly
2.Battery undervoltage, charge the battery
3.Contact after-sales service to replace damaged parts
1.The charger is not plugged in properly
2.Battery temperature is too low
3.Battery temperature is too high