2 pcs
Press the power button, the light is blue, the power is about
70% to 100%
Press the power button, the light is green, the power is about
40-70%
Press the power button, the light is red, the power is about
10%-40%
If the light flashes, please charge in time
Check battery level
Taillight is designed as an independent switch.
Press the switch when using.
Prepare 1 suitable phillips screwdriver, 2 no. 7 batteries.
Remove the tail light, unscrew the front panel screw,
open the rear housing, and replace the batt
Buckle the rear shell, screw well, install it on the fixing ery.
plate, and finish replacing the battery.
Taillight opening and maintenance Change battery
Tail light
R/reflector
Switch
Cross screw driver
No. 7 battery
Charging cover
Battery button
Battery indicator light
To Next Page
Loading...
