EasyManua.ls Logo

HIMO C20 - Electrical schematic; Component diagram and notes; Technical Specifications; Main technical specifications

HIMO C20
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1470×610×1095mm
965mm
21.6kg
25km/h
≈80km
≈55km
0.654kW·h/100km
≤100kg
31±0.5V
15±1A
10Ah
36V
M
+
25A
fuse
+48V
+48V
+5V
-
ACC
TX
RX
+5V
Electrical schematic
Motor
The controller
Overspeed alarm
The cathode
Overspeed warning signal
The cathode
The cathode
Power signal
Headlight signal
Booster sensor
Headlight
Display
Power interruption brake
The cathode
The signal of handle
The cathode
Note: long press the button for 3-5 seconds to turn on the
machine. After starting up,press the button again to turn
on the headlight and long press to turn off the machine.
Battery
Dimensions L*W*H
Front and rear wheel center distance
Max weight
Maximum design speed
Assisting rang
Electric range
Consumes electricity100KM
Loading weight
Motor Spec.
Under voltage protection
Over current protection
Controller Spec.
Battery Spec.
Main technical parameters of the bike
Under the condition of full power, loading weight is 75kg, the temperature is about 25, the environment of flat road is still
without wind, and the driving condition is measured at 15km/h uniform speed under the energy-saving mode. The actual
endurance will be different due to factors such as load, temperature, wind speed, road surface and operating.
Battery type
Capacity
Voltage
Lithium ion battery
250W
260r/min
36V
Brushless dc motor
Motor type
Rated power
Rated speed
Voltage
Knob
5A charging fuse
charging port of the battery.

Other manuals for HIMO C20

Related product manuals