+
1-2
3-4
5-6
Transmission using
Transmission diagram
When using a gear system, try not to skip gears, which can easily damage the gear. It is not possible to change two gears at a time above, should be
a level of adjustment, can better protect the gear system.
Do not reverse the gear system when the bike stops running, or when it is going downhill. This will not only be bad for the gear system, but also
may cause accidents.
If it is their gear fault, or gear is not accurate situation, will affect the performance of the transmission, at this time should be timely to the
professional bike shop maintenance, in case of aggravation of the fault.
When using the transmission system, also pay attention to the following details
Gear
SpeedPower
Relaxed Slow
Fast
ModerateModerate
Hard
To speed up, start with a lower gear and shift to a higher gear as you speed up
When going uphill, the speed will decrease and the gear will be lowered to maintain a certain
pedal strength
Downwind will speed up, increase gear to maintain a certain degree of pedal strength
The above is riding advice, according to personal habits to reasonable use of gear
Shift up
-
Shift down
Gear pointer
To Next Page
Loading...
