Transmission using
Transmission diagram
When using a speed change system, try not to skip gears, which can easily damage the transmission.It is not possible to change two gears at a time above,
should be a level of adjustment, can better protect the transmission system.
Do not reverse the transmission system when the bike stops running, or when it is going downhill. This will not only be bad for the transmission system, but also may
cause accidents.
If it is their transmission fault, or gear is not accurate situation, will affect the performance of the transmission, at this time should be timely to the professional
bike shop maintenance, in case of aggravation of the fault.
When using the transmission system, also pay attention to the following details
Gear Speed
Slow
Fast
Moderate
Power
Rlax
Moderate
Hard
To speed up, start with a lower gear and shift to a higher gear as you speed up
When going uphill, the speed will decrease,the gear will be lowered to maintain a certain pedal
strength
Downwind will speed up, increase gear to maintain a certain degree of pedal strength
Shift down
Gear pointer
Shift up
The above is cycling advice, according to personal habits to reasonable use of gear
To Next Page
Loading...