Maintenance and repair
Whether the fastener is locked or not, whether the joints of all parts are normal:
Whether the tread pattern of the tire is worn and cracked, whether the front and rear tire pressure is appropriate,
Whether the drive system is smooth;
Whether the brake system is working properly.
Regular bike inspection
When this product is not in use for a long time, please do not store it in outdoor environment, under strong light
and below zero, and keep it at least 2m away from heat source (heating equipment, etc.).
Store in a dry, clean, well-ventilated indoor environment where the temperature is 10℃ ~ 45℃ and the relative humidity is no more than 90%.
If you do not use the bike for a long time, pay attention to regular charging (generally about two months apart) to maintain battery performance;
This product should not contact with corrosive liquid to avoid any mechanical impact and heavy weight.
Bike storage method
Should not be subjected to severe mechanical impact, exposure to the sun, rain, chemical corrosive substances and harmful gases during
transportation；
During the process of loading and unloading, the products should be handled with care and be strictly protected against throwing, tumbling
and heavy weight.
The transportation
To Next Page
Loading...