Need help?Do you have a question about the Hinowa GOLDLIFT 14.70 and is the answer not in the manual?
General| Brand | Hinowa |
|---|---|
| Model | GOLDLIFT 14.70 |
| Category | Lifting Systems |
| Language | English |
Details on customer service, use of original spare parts, and warranty terms.
Manufacturer's declination of responsibility for damages due to improper use or alterations.
Overview of the GOLD LIFT machine, its components, and operational capabilities.
Details on the manufacturer's identification plate and its location on the machine.
Specifies the key dimensions of the GOLD LIFT 14.70 in running and transport configurations.
Comprehensive technical specifications for the GOLD LIFT 14.70 platform.
Detailed technical data for the platform, including height, capacity, range, and weight.
Technical specifications for petrol and diesel engines used in the GOLD LIFT.
Technical data for the hydraulic and electric systems of the GOLD LIFT.
Identification and labeling of key components of the GOLD LIFT 14.70 machine.
Emphasizes operator's duty to follow safety rules and maintain equipment.
Specifies essential protective clothing and gear for safe operation and maintenance.
Instructions on safety valves, fire prevention, refueling, and hot exhaust pipes.
Guidelines for washing the machine and avoiding damage during operation.
Description, meaning, and location of warning and instruction stickers on the machine.
Information on tested acoustic pressure levels and operator vibration exposure.
Details on the basket control device, including electric panel and component functions.
Explanation of the levers and functions for controlling the basket's hydraulic movements.
Controls for machine translation and stabiliser movement via hydraulic system.
Emergency control functions situated on the revolving turret for ground operation.
Details on battery cutout, overpressure valves, cylinder stop valves, and their functions.
Safety features including alignment photocells, load sensor, and control lever guards.
Information on water level indicator, pin locking, and emergency stop/enabling controls.
Operation of the hand pump and solenoid valves for emergency descent procedures.
Guidelines for safe distances from electrical lines based on voltage levels.
Advisories on operating in adverse weather and suitable working area conditions.
Recap of essential safety regulations for platform operators before starting work.
Information on the safe working area and load limits for the GOLD LIFT 14.70.
Daily checks required before starting operation of the platform.
Procedures for starting petrol/diesel or electric engines and translating the machine.
Steps for stabilizing, levelling, and moving the control car.
Emergency descent procedures and specific warnings for various platform uses.
Procedure for basket removal and safety regulations for transporting the machine.
Guidelines for safely loading and unloading the platform onto transport vehicles.
Procedures for safely lifting the machine and identifying correct hooking points.
Instructions on how to secure the machine using tie-rods for safe transport.
Essential safety precautions to follow during greasing and lubrication tasks.
Chart of recommended oils/lubricants and diagram of greasing points.
Critical safety rules to observe before and during maintenance operations.
Schedule for general controls and specific maintenance tasks based on operating hours.
Procedures for checking, adjusting, and replacing rubber tracks.
Checking tightness of bolts, nuts, sliding blocks, and wear on various components.
Procedures for checking hydraulic oil, leaks, filter, battery, and engine maintenance.
Solutions for pump noise, low pressure, and hydraulic system failures.
Troubleshooting for superstructure detachment, control stops, and load cell errors.
Ensuring controls return to neutral and safety devices operate correctly after repairs.
Schematic diagram of the hydraulic system for the GOLD LIFT 14.70.
Legend for hydraulic components and schematic for system with 2nd speed.
Guidance on interpreting wiring diagrams, component identification, and color codes.
Layouts for control boards, load cell unit, CPC, and electrical component locations.
To Next Page
