18
3.1 Voltage Measurement
Quick Start Manual
To set an arbitrary recording period, choose "OFF" for "Continuous"
and then set the desired time.
Unless the Store CH setting is on, it is not possible to make input
settings in the channel screen.
Set the recording period (Record Time) to "7 days."
Move the blinking cursor to the position shown.
Select "7 d."
Turn on the channel 1 (CH1) of the Store CH.
Move the blinking cursor to the position shown.
Turn on the channel 1, by putting a check mark in the CH1
box of Store CH.
To Next Page
Loading...
