Need help?Do you have a question about the Hioki LR8450 and is the answer not in the manual?
General| Model | LR8450 |
|---|---|
| Category | Data Loggers |
| Dimensions | 330 mm (12.99 in) W × 221 mm (8.70 in) H × 120 mm (4.72 in) D |
| Weight | Approx. 2.8 kg (excluding battery) |
| Operating Temperature | 0 to 40 °C (32 to 104 °F), 80% RH or less (no condensation) |
| Sampling Rate | 1 ms to 1 hr |
| Memory | Internal memory |
| Interface | USB, Ethernet |
| Power Supply | AC adapter or battery |
| Measurement Range | Varies with module |
| Accuracy | Varies with module |
| Storage Media | SD card |
| Memory Capacity | Internal memory |
| Input Type | Voltage, temperature |
| Temperature Measurement | Varies with module |
| Communication Interface | USB, Ethernet |
| Measurement Channels | Up to 120 channels (with optional input modules) |
Covers fundamental operations like setting entry, module registration, and measurement condition setup.
Details how to configure settings such as recording interval and recording time.
Guides on configuring input channels for voltage, temperature, humidity, resistance, CAN, and pulse measurements.
Provides instructions on starting and stopping measurement using the START and STOP keys.
Details how to display and analyze waveforms, including scrolling, zooming, and using cursors.
Introduces how to start and stop recording using the trigger function and its shared settings.
Describes how to set triggers for individual analog, pulse, and waveform calculation channels.
Describes three methods to save data: auto save, immediate save, and selective save.
Explains how to load previously saved data from media into the instrument.
Covers operations like formatting, loading, deleting, renaming, copying, and sorting files.
Describes how to use the USB cable to load data from an SD memory card to a computer.
Explains how to perform calculations on measured values like max, min, average, and integration.
Details how to perform basic arithmetic operations and other calculations between channels.
Covers system functions like setting time, backlight, language, and power frequency filter.
Describes how to set the time, initialize the instrument, and perform system configuration checks.
Details the Logger Utility software for instrument configuration, operation, and waveform observation.
Instructions on connecting the instrument to a computer using a USB cable and installing the driver.
Guides on connecting the instrument to a computer via a LAN cable, including network settings.
Explains how to configure wireless LAN settings for the LR8450-01.
Describes methods to deal with noisy environments and prevent noise contamination.
To Next Page
