Hioki LR8450 - Configuring Waveform Calculation Settings at Once

209
Performing Waveform Calculations
Conguring waveform calculation settings at once
This section describes how to congure the waveform calculation on or o󰀨 and waveform display
color settings for all waveform calculations.
> >
2
2
1
1
1
Select the waveform calculation ON/OFF check box and press the ENTER key.
Each time you press the ENTER key, all calculation channels will toggle between ON and OFF.
2
Select the measurement display color check box and press the ENTER key.
Each time you press the ENTER key, the display setting for all calculation channels will toggle
between ON and OFF.
Numerical and Waveform Calculations
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187