Hioki LR8450 - Sending a Test Email

288
Sending Emails
Sending a test email
This section describes how to check whether the product can send an email.
> >
2
2
1
1
1
Press the ENTER key while [E-mail settings...] is selected.
The settings window will open.
2
Press the ENTER key while [Send test] is selected on the [Advanced] tab.
The instrument will send a test email.
It takes about 1 second to send an email.
If you are unable to send an email, check the instrument’s email transmission settings.
If you nd no issues when sending the test email, start measurement.
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187