Hioki LR8450 - Assigning Event Marks When Alarms Occur

188
Assigning Event Marks When Alarms Occur
5.3 Assigning Event Marks When Alarms Occur
This section describes how to assign event marks when alarms occur.
This function must be congured before measurement begins.
> >
1
1
1
Under [Event mark], select whether to add an event mark when an alarm occurs.
OFF

, ON
If you set it to [ON], an event mark and number will be assigned when an alarm occurs.
See “4 Alarm (Alarm Output)” (p. 171).
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187