Hioki LR8450 - Forcibly Activating the Trigger

132
Forcibly Activating the Trigger
2.8 Forcibly Activating the Trigger
This section describes how to forcibly activate the trigger during the trigger standby state.
You can forcibly activate trigger regardless of the trigger source settings.
1
1
1
Press the ENTER key while [Forced trigger] is selected.
The trigger will activate.
When the instrument is in the trigger wait state, you can forcibly apply a trigger by pressing the
START key.
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187