Hioki LR8450 - Channel Comments

65
Entering Comments
Channel comments
This section describes how to enter a string of text for each channel. (Up to 40 single-byte
characters)
See “Text entry method” (p. 10).
Channel comments are displayed on the screen when the waveform screen is set to [Wave+Value].
Channel comments allow you to identify channels when measuring numerous channels.
> >
1
1
1
Select [Comment] with the Left Arrow, Right Arrow, Up Arrow, and Down Arrow keys and
press the ENTER key.
The text entry window will open.
See “Text entry method” (p. 10).
2
Enter text and press the ENTER key.
The entered text will be accepted.
You can use [Comment] on the settings list screen to enter channel comments.
See “1.9 Conguring Channels in a List” (p. 67).
Settings and Operation
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187