283
Sending Data Using the FTP Client
Data transmission times
Transfer time (s) = File size (KB) / transfer speed (KB/s) + transfer preparation time (s)
For more information about le sizes, see “11.9 File Size” (p. 395).
Use 4 MB/s as a rough transfer speed and 3 s as a rough transfer preparation time.
Example: For a 40 MB le
Transfer time = 40 MB/4 (MB/s) + 3 (s) = 10 + 3 (s) = 13 (s)
Checking FTP communications status
This section describes how to check the FTP communications status.
You can display the number of les sent by FTP, the number of transmission errors, and other
statistics.
> >
1
2
1
Press the ENTER key while [FTP data auto send settings...] is selected.
The settings window will open.
2
Under [FTP communication status], check the le counters.
Total, Sent, Failed, Unsent
The counters will be reset to 0 under the following circumstances:
• Press the ENTER key while [Clear] is selected.
Communicating with a Computer (PC)
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
