Hioki LR8450 - Copying Channel Settings

72
Conguring Channels in a List
Copying channel settings
This section describes how to copy one module’s settings to another module.
> > [Unit n], [Remote n] (n = 1, 2, . . .)
2
2
3
3
1
1
4
4
5
5
1
Press the ENTER key while [Copy...] is selected.
The settings window will open.
2
Under [Original], select the copy source unit and channel.
3
Under [Copy items], select the checkboxes for the items you wish to copy.
4
Under [Copy to], select the checkboxes for the units and channels to which you wish to
copy the settings.
5
Select [OK] and press the ENTER key.
The settings will be copied.
Pressing the ENTER key while [Cancel] is selected to cancel the copy operation.
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187