396
Settings after Initialization (System Reset)
11.10 Settings after Initialization (System Reset)
This section describes the settings (for the U8550) at the time of shipment from the factory and
following initialization (system reset).
Screen Setting
Main Sub Setting Default setting
Measure Record Start Manual
Stop Manual
Recording mode Normal
Recording interval 10 ms
Repetitive recording OFF
Recording time Continuous
Alarm source OFF
Auto save File name –
Add title comment
(OFF)
Add trigger date/time
(OFF)
Media SD card
Waveform data Format OFF
Downsampling OFF
Deleting OFF
Folder splitting Disable
File splitting Disable
Numerical calculation
results
Format OFF
File splitting Single le
Text format Decimal symbol* Period
Delimiter* Comma
Date format yy-MM-dd hh:mm:ss.0
Manual save SAVE key settings Select & Save
File name –
Add trigger date/time
(OFF)
Media SD card
Type Waveform
Format Binary
Range All
Downsampling OFF
Display Horizontal axis 10 s
Display horizontal axis Time
Number display format Standard
Settings Auto-setup* OFF
Setting condition list* None saved
*: Not included in initialization (factory default setting).
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
