281
_____________________________________________________________________
14.6 Harmonic Wave Analysis Function
______________________________________________________________
Averaging function
ON/OFF (Obtains the simple average of all data loaded
within a period equal to 1/80 of the time axis)
Waveform enlargement/compression factor
（Time axis）
（Voltage axis）
x4, x2, x1, x1/2, x1/4, x1/6, x1/12, x1/24, x1/48
x100, x50, x20, x10, x5, x2, x1, x1/2, LOG
Print type
Dotted line graph of each analysis value,
numerical data*
1
Print interval
(Numerical data)
1, 8, 16, 40, 80, 160, 400, 800 samples
Auto print
ON/OFF; prints simultaneously with the display on the
screen in real time.
Manual print
Available
Partial print
Prints out the portion of a graph between cursors A and
B.
Scaling function
Available
(1) When using a Hioki clamp, the unit of
measurement is automatically set to "A" once the
model name has been selected.
(2) PT/CT ratio can be set.
(3) When using a clamp from another manufacturer, the
unit of measurement is automatically set to "A" once
the voltage/current conversion ratio has been input.
Scroll function
Scrolls analysis value graphs in any direction.
Tabulated results
output
Outputs a list of the maximum and average values for
each analysis result over the entire recording period.
(*1): Time display printing
To Next Page
Loading...
