EasyManua.ls Logo

Hioki 3554 User Manual

Hioki 3554
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BATTERY HiTESTER
INSTRUCTION MANUAL
3554

Table of Contents

Other manuals for Hioki 3554

Question and Answer IconNeed help?

Do you have a question about the Hioki 3554 and is the answer not in the manual?

Hioki 3554 Specifications

General IconGeneral
Testing Frequency1 kHz
DisplayLCD
Battery TypeLR6 (AA) alkaline batteries
Power SupplyAA alkaline batteries or AC adapter
Dimensions192 mm W × 121 mm H × 55 mm D

Summary

Chapter 1 Overview

1.1 Measuring Battery Wear

Explains how to determine battery wear by measuring internal resistance in a new or good battery.

1.3 Features

Highlights key features like live-wire measurement, four-terminal AC method, simultaneous display, and memory capacity.

Chapter 2 Measurement Preparations

2.2 Installing or Replacing the Batteries

Guidance on inserting or replacing the eight AA (LR6) alkaline batteries.

Chapter 3 Measurement

3.2 Setting the Measurement Range

How to set the resistance and voltage measurement ranges for the instrument.

3.3 Zero-adjustment

Procedure for adjusting the zero values to improve measurement reliability.

3.5 Determining Battery-wear Judgment Values

Guidance on setting judgment values for battery wear based on initial measurements.

3.6 Battery Measurement

Steps for measuring battery internal resistance and voltage to judge battery wear.

Chapter 4 Comparator Feature

4.1 Overview

Introduction to the comparator feature for determining measurement ranges (pass, warning, fail).

4.3 Setting Comparator Permissible Values

Guide to setting resistance upper limits and voltage lower limits for comparisons.

Chapter 5 Memory Feature

5.2 Saving to Memory

Instructions for manually saving measured values to internal memory.

5.5 Deleting Saved Data

Methods for deleting single data sets, entire units, or all saved data.

Chapter 7 Connecting with a Computer

7.1 Overview

Describes connecting the instrument to a PC for data transfer and configuration.

7.2 Installing the Software

Step-by-step guide for installing the application software on a personal computer.

7.3 Installing the USB Driver

Instructions for installing the USB driver for various Windows operating systems.

7.4 Using the Software

Guides on connecting, starting, clock-setting, preparing/editing/transferring data, and closing the software.

Chapter 8 Specifications

8.2 Accuracy

Details accuracy guarantees, conditions, and temperature coefficients for measurements.

Chapter 9 Maintenance and Service

9.1 Troubleshooting

Guides on identifying and resolving common instrument operational issues.

Related product manuals