5.4 Reading Saved Data
Saved measured values can be read and displayed.
5.4 Reading Saved Data
1.
Press key.
This will display the reading
screen.
2.
Press / keys to
select the memory no.
Press / keys to select
digits.
The measurement values for the selected memory no. will
be displayed.
In this example, C.003 has
• Press key to check the date and time of
saving (which will be displayed while the key is
depressed).
• The comparator results for the data being read
will also be displayed.
• Numbers to which no data is saved cannot be
selected.
• If no data has been saved, "- - - -" will be dis-
played in the space for the memory no. and the
display will return to the measurement screen.
• For data measured using the optional 9460 CLIP
TYPE LEAD WITH TEMPERATURE SENSOR
with temperature sensor, the temperature will
also be displayed.
To Next Page
Loading...
