7.1 Overview
By connecting the instrument to a personal computer using the
USB cable, measurement data stored in the instrument's internal
memory can be transferred to the personal computer and com-
parator permissible values set on the personal computer can be
loaded to the instrument. In addition, clock settings and mea-
surement data can be deleted.
7.1 Overview
USB cable
Model 3554
Personal compute
Reading data from the 3554’s internal
memory (
⇒ p.117)
Clock-setting (
⇒ p.105)
Transferring tables of permissible
values (
⇒ p.115)
Deleting data from the 3554’s
internal memory (
⇒ p.121)
Editing a table of permissible values
on the 3554 (
⇒ p.112)
The following software must be installed in order to
enable communication between the instrument
and a personal computer. Each of these is
included in the CD accompanying the instrument.
• Communication driver
• Application Software for 3554
To Next Page
Loading...
