4.2 Turning On the Comparator
4.2 Turning On the Comparator
1.
Press key.
The comparator no. will flash.
Press key again to return
to ordinary settings.
2.
Press / keys to
select the comparator no.
Press / keys to select
digits.
3.
Press key to save the
settings.
The message "On" will ap-
pear on the screen, indicating
that the comparator feature
has been turned on.
In this example, comparator
no. 3 has been selected
(available range: 0 - 200)
To Next Page
Loading...
