Hioki 3554 - 5.2 Saving to Memory

5.2 Saving to Memory
64
Pressing key will save the currently measured values.
Convenient feature: Auto-memory Feature (⇒ p.75)
5.2.1 Saving Measured Values to Memory
5.2 Saving to Memory
1. Press key.
The memory feature will turn
on.
2.
If you want to save the data
under a different number
than the memory no. dis-
played, use the
keys to change the value.
After approximately one sec-
ond passes with no settings
made, the settings displayed
will be entered and the instru-
ment will return to the mea-
surement screen.
The settings can also be fi-
nalized by pressing key.
This operation can be used at
any time while the memory
feature is in effect.
In this example, C.003 has
been selected