Hioki 3554 - Page 73

65
5.2 Saving to Memory
索引
4
3
2
1
7
6
5
10
9
8
Memory Feature
3.
Use key to hold mea-
sured values.
4.
Use key to save mea-
sured values.
Measured values will be
saved to the memory no. se-
lected.
5.
When saving is complete,
the next memory no. for sav-
ing data will be displayed.
The hold will be released.
When "- -.- -" is displayed
,
values cannot be held.
The last data saved can be deleted by holding
key down for two seconds or longer.
These values can be deleted only immediately after
saving them. Using the keys to change settings or
other operations will disable this feature.