Hioki 3554 - 5.5 Deleting Saved Data

69
5.5 Deleting Saved Data
索引
4
3
2
1
7
6
5
10
9
8
Memory Feature
Saved measured values can be deleted as described below.
5.5.1 Deleting a Single Data Set
5.5 Deleting Saved Data
1.
Press key.
This will display the reading
screen.
2.
Press / keys to
select the memory no.
Press / keys to select
digits.
3.
Press key.
If there is no activity for
approximately three sec-
onds, the reading screen will
be displayed.
4.
Press key to save the settings.
Data stored to the selected memory no. will be deleted.
In this example, unit C has
been selected
(The measured values saved
under C.003 will be dis-
played.)
Memory no. flashes