Hioki 3554 - Chapter 7 Connecting with a Computer

73
6.1 Averaging Feature
索引
4
3
2
1
7
6
5
10
9
8
Other Features
When measured values are unstable, they can be stabilized
using averaging. The number of times averaging is conducted
can be selected from four, eight, or 16 times. When using the
averaging feature, icon is displayed on the screen. This
feature is turned off under initial settings and after resetting the
system.
Press key to display the current number of times used
for averaging. Keep this key depressed to switch the number of
times set.
After approximately one second passes with no settings made,
the settings displayed will be entered and the instrument will
return to the measurement screen.
Other Features Chapter 6
6.1 Averaging Feature
OFF
4
8
16
• The averaging feature is conducted for resis-
tance values.
• The averaging feature can be used to change the
rate of updating display of measured values.
• When not using the averaging feature, select
"OFF."