6.3 Auto-memory Feature
索引
4
3
2
1
7
6
5
10
9
8
Other Features
This feature saves measured values to memory automatically,
immediately after the values have been held.
Configuring the Auto-memory Feature
Press several times key to display the icon. At this
point, the memory feature is in effect.
Use the keys to select the memory no. to which the
data will be saved. When data has already been saved to the
memory no. selected, the icon will be displayed.
Releasing the Auto-memory
Press several times key to turn off the icon.
6.3 Auto-memory Feature
Auto-hold
Auto-
memory
Auto-hold &
Auto-memory
OFF
When using the auto-memory feature together
with this feature, measured values can be saved
automatically after holding them.
In order to judge whether the "OF" display has
resulted from mistaken range settings, using the
comparator as well, or setting the comparator
buzzer to "WARN/FAIL," is recommended.
"Section 4.4 Setting the Comparator Buzzer" (⇒
p.61)
To Next Page
Loading...
