Procedure
1
Procedure
Operation and Screen Types
(p.15)
Describes the screen types and an overview of the
operating keys.
Measurement Procedure
(p.19)
Describes procedures from measurement prepara-
tion to analysis.
Monitoring Voltage Fluctua-
tions (p.22)
This section describes voltage measurement using
an AC transducer to acquire voltage fluctuation data
for one week, with the data automatically saved on a
CF card.
(The example transducer provides 0 V - 10 V DC
output proport
ional to 0 V - 150 V AC rms input.)
Monitoring Temperature
Changes (p.24)
This section describes temperature measurement
using a type K thermocouple to acquire temperature
data once per second, for monitoring temperature
changes. The post-measurement saving method is
also described.
Monitoring Energy Con-
sumption (p.27)
This section describes pulse measurement using a
watt-hour meter* to acquire integrated power con-
sumption data for one month.
* The example watt-hour meter provides an output of
50,
000 pulses/kWh.
Monitoring Heat Flow (Model
LR8432-20 only) (p.29)
This section describes heat flow and temperature
measurement using the Heat Flow Sensor and ther-
mocouples. (LR8432-20 only)
Here we explain how to measure heat flow and tem-
perature every second (using the Heat Flow Sensor
and thermocoupl
es K) and how to measure changes
in these variables.
Analysis (p.33)
View and calculate waveform measurement values
using the A/B cursors.
LR8431B981-03
To Next Page
Loading...
