Safety Information
4
This instrument is designed to conform to IEC 61010 Safety Standards,
and has been thoroughly tested for safety prior to shipment. However,
using the instrument in a way not described in this manual may negate
the provided safety features.
Before using the instrument, be certain to carefully read the following
safety notes:
Safety Information
Mishandling during use could result in injury or death, as well
as damage to the instrument. Be certain that you understand
the instructions and precautions in the manual before use.
With regard to the electricity supply, there are risks of electric
shock, heat generation, fire, and arc flash due to short cir-
cuits. If persons unfamiliar with electricity measuring instru-
ment are to use the instrument, another person familiar with
such instru
ments must supervise operations.
Safety Symbols
Indicates cautions and hazards. When the symbol is printed on the instrument,
refer to a corresponding topic in the Instruction Manual.
Indicates DC (Direct Current).
Indicates AC (Alternating Current).
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
To Next Page
Loading...
