1. Press the WAVE/DATA key to display [Gauge+Wave].
2. Set [B: ON]. (This enables the display channel selection and the gauge B is displayed
on the left of the screen.)
The gauge A can be switched by pressing the CH ▲ key or the CH ▼ key. (Refer to
“Analysis” (p. 33) for other analysis methods.)
Observe the Waveform, Displaying Two Gauges (As necessary)
Observe the waveform, displaying two gauges on the [Gauge+Wave] screen of the
waveform screen. It is effective to assess the correlation between the heat flow and the
temperature.
Select
Apply
Select
Apply
To Next Page
Loading...
