Analyzing HiLogger Data on a Computer
Recorded data can be analyzed and HiLog-
ger settings can be changed using a com-
puter running the supplied application
program. Not only waveforms, but also nu-
merical values and alarm output states can
be monitored in real time. Measurement
data from up to five instruments can be col-
lected by one computer using USB connec-
tions. To use the Logger Utility, connect a
USB cable after setting the [USB Mode] set-
ting on the [System] screen to [USB Com-
munication].
To access the HiLogger’s CF card from a com-
puter, connect a USB cable after setting the
[USB Mode] on the [System] screen to [USB
Drive].
To Next Page
Loading...
