7
The LR8450 can be directly connected to a PC via wireless LAN.
Access point mode
Observe data from a remote location using a PC or a tablet
You can reduce interference with other wireless devices by using an
open channel. Check for open channels on the instrument’s screen.
Simple registration of wireless units
Check the unused wireless LAN channels
and select the wireless channel to use
LR8450-01 (wireless LAN model) only
By connecting the LR8450-01 to a PC or a tablet via wireless LAN, you can control the instrument remotely using the built-in HTTP server or
obtain download data les using the built-in FTP server.
(You cannot use Logger Utility when using Station Mode or Access Point Mode.)
Make measurements in locations where it would be difcult to route wires
Inside a room, or outside, you can make measurements with the door closed.
Wireless LAN communicationsWireless LAN communications
AP
Connect wirelessly to a third-party access point (AP).
Station mode
AP
STA
Work time can be reduced using the LR8450-01 and wireless units, since only minimal wiring is required. If the measurement target is
located in a lab, this approach eliminates the need for wiring and avoids having to drill holes in the walls of the monitoring room where
data is being checked.
Wireless units, located within the
range, that are not connected
to another LR8450-01, can be
automatically detected. Simply
choose the unit you wish to
register from the list.
Registration
complete!
STA
STA
ES France - Département Tests & Mesures - 127 rue de Buzenval BP 26 - 92380 Garches
Tél. 01 47 95 99 45 - Fax. 01 47 01 16 22 - e-mail: tem@es-france.com - Site Web: www.es-france.com
To Next Page
Loading...
Need help?
General
