HIS Low Profile Kit - User Manual

LOW PROFILE KIT INSTALLATION GUIDE
Step 1: Removing the original full-height bracket
•
Dissipate any static from yourself
by touching the metal siding on
your chassis
• Remove all the mounting screws
from the original full height
bracket
• You should keep the removed
bracket for future use, if
necessary
Step 2: Choose the right bracket to install
• Check the output ports of the
HIS video card and match it with
the corresponding low-profile
bracket
• If the (S-Video/DVI) + (D-Sub)
bracket configuration is to be
used, the card will need to be
fitted with the extended VGA
ribbon cable
BKT-SB22NT BKT-R7B2NT
BKT-S8M2NT BKT-GE44NT

Summary

Removing the Original Full-Height Bracket

Choosing the Right Bracket to Install

Installing the Low-Profile Bracket

Installing the Card Back to Your Computer

Low Profile Bracket Compatibility List

HIS Low Profile Kit Specifications